Feel free to page
http://chomikuj.pl/adamt90/Plany+modelarskie/*c5*bcaglowce
HMS Victory is only a small part of the new models of free plans
I invite you to my blog, I will publish here a lot of planning models. Rc Models, Sailing Yachts, but also to show here plans to build a remote-controlled aircraft Of course, do not forget the latest in technical, Radio RC servo mechanisms receivers
środa, 28 grudnia 2011
sobota, 24 grudnia 2011
czwartek, 22 grudnia 2011
wtorek, 20 grudnia 2011
Description of the construction plans and RWD 5 RC Plane
Plans can be found at:
rapidshare.com/files/390931203/rwd5_140x86.pdf
Weight is only 24KB file is in PDF format.
The materials needed for construction:
1 to 2 sheets of 6mm depronu smooth (eg, textured panels Izoflor's Decora) - Nomi and comfort in selling, but unfortunately the package, and unfortunately one side grooved - Sheets 120x50cm
- 2 sheets of 3mm depronu unilaterally grooved - a company / manufacturer / availability / dimensions as above
- Some glue to the foam, for example, the cheapest polymer adhesive
- A small amount of resin, a 10-minute or a two-component adhesive resin
- 6x2mm pine slats no more than 4 meters
- Plywood 3mm approximately 1dm2
- 6mm dia wooden dowel about 15cm
- 2mm hardened steel wire of about 0.5 m
- 1.5 mm steel wire hardened about 0.5 m
- Bowden wire of 0.7 mm approximately 1m
- Pieces of plywood 0.8 mm
Description borrowed from the www.pfmrc.pl that because I use the same description.
Tools:
-Knife for wallpapers
-Adhesive Polymer
-Willingness:)))
-Scissors
Probably something else but it will add later.
rapidshare.com/files/390931203/rwd5_140x86.pdf
Weight is only 24KB file is in PDF format.
The materials needed for construction:
1 to 2 sheets of 6mm depronu smooth (eg, textured panels Izoflor's Decora) - Nomi and comfort in selling, but unfortunately the package, and unfortunately one side grooved - Sheets 120x50cm
- 2 sheets of 3mm depronu unilaterally grooved - a company / manufacturer / availability / dimensions as above
- Some glue to the foam, for example, the cheapest polymer adhesive
- A small amount of resin, a 10-minute or a two-component adhesive resin
- 6x2mm pine slats no more than 4 meters
- Plywood 3mm approximately 1dm2
- 6mm dia wooden dowel about 15cm
- 2mm hardened steel wire of about 0.5 m
- 1.5 mm steel wire hardened about 0.5 m
- Bowden wire of 0.7 mm approximately 1m
- Pieces of plywood 0.8 mm
Description borrowed from the www.pfmrc.pl that because I use the same description.
Tools:
-Knife for wallpapers
-Adhesive Polymer
-Willingness:)))
-Scissors
Probably something else but it will add later.
niedziela, 18 grudnia 2011
Subskrybuj:
Posty (Atom)