Model boat sailing Isabel Monteleone Italian company to assemble it yourself. The hull is made of plastic, wood deck with cedar frames with laser-cut plywood, sails made of dakronowego.
The kit includes zkompletnym hull deck, mast, sails, rigging, tail, stickers, sword Ballast, Stand Model, imitation wiring.
Specifications;
* Overall Height: 1050 mm.
* Hull length: 750 mm.
* Width: 200 mm.
* Sail area: 28.1 dm2
* Weight: 3850 g.
Professional 3-channel apparatus of the German company Graupner. 40MHz FM frequency SSM
- Built-in computer with 8-bit processor
- Easy to read LCD display
- Memory for the three models
- Digital Trimmers
- Comfortable foam handlebar
- Switch "Dual Rate"
- Instruction in Lake. German, English and French
Includes transmitter, receiver, servo, battery and cart off
S8 BX2 RTR is a new model of LRP. Refined and equipped so as to enable the driver to derive the greatest joy of driving.
Equipped with a new transmitter LRP C3-STX, better and more responsive brakes, pre-set fitted with stabilizers (front and rear 2.2 mm 2.8 mm), corrected body (aerodynamics and appearance) and added seven-rims - all this makes the S8 BX2 RTR is an ideal model for each player.
Receiver 6-Channel 2.4 GHz. With a small (13g) weight receiver (with 7 channels), the set could be very interesting for small models.
Very extensive 2.4GHz spectrum allows multiple transmitters at the same time work without mutual interference, also do not apply kwarców.System cumbersome apparatus used in the 2.4 GHz system is bezkwarcowym, advanced very fast transmission of FHSS modulation. Such work virtually eliminates interference from other transmitters, and any other noise interference and allows the use of multiple transmitters in one place.
Specification:
* Frequency: 2.4GHz
* The distance between the channels: 2048 kHz,
* Modulation: FHSS
Receiver: R6EH
* Number of channels: 6
* Power Supply: 4.8V - 6V
* Power consumption: 9.5 mA (for 4.8 V)
A new series of apparatus for 2.4GHz digital programming, memory models for 6-Sets of 6-channel transmitter and receiver.
A set dedicated to the aircraft-models Flyerów Park, to operate in the hall or in the floating models, as well as models of gas and electric. With a small (13g) weight receiver (with 7 channels), the set could be very interesting for small models.
Very extensive 2.4GHz spectrum allows multiple transmitters at the same time work without mutual interference, also do not apply kwarców.System cumbersome apparatus used in the 2.4 GHz system is bezkwarcowym, advanced very fast transmission of FHSS modulation. Such work virtually eliminates interference from other transmitters, and any other noise interference and allows the use of multiple transmitters in one place.
Transmitter Features:
* The choice of models, six models of memory
* Model name (four characters)
* Switch to manual 3 and Dual Rate EXP
* Fully digital trimmers with memory settings
* Settings endpoints servos (ATV / EPA), separate for each party
* Low battery voltage alarm transmitter
* Functions Fail-SafeReset
* Charging socket packet transmitter
* The coach / uczeńMiksery
* Key to stopping the engine (engine-cut)
* V-tail mixers and more.
Specification:
* Frequency: 2.4GHz
* The distance between the channels: 2048 kHz,
* Modulation: FHSS
Transmitter: T6EHP-E
* Power: 9.6-12VDC, as 8xAA NiCd / NiMH or alkaline battery as 8xAA
* Power consumption: only - 70mA
* Number of channels: 6, proportional
* Coverage: stable at ground level air at 500 meters and visual contact with the receiver over 800m
* 100-segment display
Today I found a very interesting model sailboats
Monsoon TO MODEL RC ŻALÓWKI powered by wind. THIS MODEL IS TO SAIL roadstead. SIMPLY Remove from the box SUBMITTED SOME PARTS (time required to deposit the boat is about 10 min.)
Model parameters:
- Length: 900 mm
- Height: 1800 mm
- Weight: 2800 g
- Sail area: 0.38 m2
KIT INCLUDES:
* RC Model RTS
* Apparatus (without batteries)
* 2 CH Transmitter
* Servo-type lift (to select / loosening the two sails)
* Servo direction
The price of this set is quite bearable.
Hello again tomorrow to add picture Yacht Rc which is currently build, and so might its dimensions and drawing paper.
Length 1200 mm
Width 245 mm
Ballast approx 2.5 kg
Mast length 1600 mm
Today I add the RC model plans "Monika"
Palo de Agua
Very interesting RC model, it is very simple in construction. Download here.
The first is not shared with plans to build a large sail JIF.65 which can be downloaded here JIF.65
Hi, my blog will be dedicated to remote control models. I will mainly presented models of yachts and sailing boats, RC. I'll try to post here their construction plans and photos.
